What are the unloading methods of quartz sand?

In the quartz sand production line the last step is to use the dryer for the final treatment, then whether we have some understanding of the quartz sand unloading? Today, by quartz detection manufacturers to bring you quartz sand dryer three kinds of unloading methods.

The drum quartz sand dryer is widely used by people. There are three ways of discharging: axial method, radial method center method.

The simplest is the axial unloading mode, the working principle of this method is the material of high-end drying, low-end discharging, using the principle of gravity cylinder rotation of centripetal force principle, if the unloading too fast, the material in the cylinder drying time will be shorter, it will reduce the drying time of materials, affect the drying effect. coal slime quartz sand dryer is often used in this way of unloading.

The working principle of radial discharge mode is that the material can be discharged evenly the discharging hole above the cylinder body, the cylinder body is equipped with a material collecting device below, then sent away by the conveying equipment to complete the whole operation process;

The center unloading method is called center unloading because the discharging pipe is installed in the center of the drum, named after the discharging position. Its working principle is that after the material is dried, the super fine quartz powder is directly picked up transported to the unloading tube under the action of the ladle unloading device assembled at the unloading end to complete the unloading process.

These three ways, each has its own advantages, play a very important role in the production process of quartz sand, choose which way, according to the actual situation customer requirements to choose, I hope today's introduction can effectively help you.